Transmission Line and Substation-Safety/Hazards

  •        Electrical safety is a general practice of workers who are exposed to handling and maintaining electrically powered equipment. It is a set of guidelines they follow to mitigate electrical hazards and prevent its dangerous effects in case of an incident. Unable to adhere to electrical safety can lead to accidents, near misses, or even fatalities.
  •        Electrical safety precautions are specific control measures implemented to remove electrical hazards and mitigate the risks of electrical accidents and injuries. Safety precautions for working with electricity depend on the worker’s job instructions and their working environment. However, the most basic electrical safety precautions include clearly understanding how electricity works, identifying and eliminating electrical hazards such as poor cable management and lack of proper housekeeping, and wearing the appropriate PPE.

       Electrical safety encompasses a huge area of general safety guidelines such as personal protective equipment (PPE) and lockout/tag-out procedures, among others. Project managers, site supervisors, and safety officers can improve electrical safety onsite when they make sure that workers are adequately trained, team leaders regularly facilitate safety meetings, and teams talk about the specifics of a job (or have toolbox talks).

       An electrical hazard exposes workers to the following: Burns, Electrocution, Shock, Arc Flash/Arc Blast, Fire, Explosions.

       Electrocution is one of the most common hazards across construction sites according to OSHA (Occupational Safety and Health Administration). Identifying electrical hazards can help raise awareness of the risks, their severity, and how they can harm workers.

       Here are common electrical hazards in the workplace and electrical safety tips on what you can do to mitigate these risks:

  1. Overhead Power Lines
           Overhead powered and energized electrical lines have high voltages which can cause major burns and electrocution to workers. Remember to maintain a minimum distance of 10 feet from overhead power lines and nearby equipment. Conduct site surveys to ensure that nothing is stored under overhead power lines. Also, safety barriers and signs must be installed to warn nearby non-electrical workers of the hazards present in the area.
  2. Damaged Tools and Equipment
           Exposure to damaged electrical tools and equipment can be very dangerous. Do not fix anything unless you are qualified to do so. Thoroughly check for cracks, cuts, or abrasions on cables, wires, and cords. In case of any defects, have them repaired or replaced. 
    Lock Out Tag Out (LOTO) procedures should be performed at all times before commencing electrical maintenance and repairs. LOTO procedures are there to protect all workers on a worksite.
  3. Inadequate Wiring and Overloaded Circuits
           Using wires of inappropriate size for the current can cause overheating and fires to occur. Use the correct wire suitable for the operation and the electrical load to work on. Use the correct extension cord designed for heavy-duty use. Also, do not overload an outlet and use proper circuit breakers. Perform regular 
    fire risk assessments to identify areas at risk of bad wiring and circuits.
  4. Exposed Electrical Parts
           Examples of exposed electrical parts include temporary lighting, open power distribution units, and detached insulation parts on electrical cords. These hazards can cause potential shocks and burns. Secure these items with proper guarding mechanisms and always check for any exposed parts to be repaired immediately.
  5. Improper Grounding
            The most common OSHA electrical violation is the improper grounding of equipment. Proper grounding can eliminate unwanted voltage and reduce the risk of electrocution. Never remove the metallic ground pin as it is responsible for returning unwanted voltage to the ground.
  6. Damaged Insulation
           Defective or inadequate insulation is a hazard. Be aware of damaged insulation and report it immediately. Turn off all power sources before replacing damaged insulation and never attempt to cover them with electrical tape.
  7. Wet Conditions
           Never operate electrical equipment in wet locations. Water greatly increases the risk of electrocution especially if the equipment has damaged insulation. Have a qualified electrician inspect electrical equipment that has gotten wet before energizing it.